Inicio >>
AEG >>
SANTO U86000-4I Manual de Usuario
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
Installation
Building the appliance in under a worktop
The dimensions of the recessed installation area must correspond with those indicated in the figure.
600
55 min0 .
600
Installation kit
1xA
1xB
2xC
12 2 2 1 1 2
1
1. Two cabinet securing brackets
are supplied with the installation pack. They need to be assembled onto the cabinet prior to cabinet being pushed into the Kitchen aperture.
Left hand bracket 1/a Right hand bracket
2. To fit these brackets remove the two screws at the top left and right hand front corners of the cabinet. 3. Position the two brackets as shown in the figure and replace the two securing screws. 10