PANASONIC SAHE90
Manual de Usuario

Step

12

3

4

Settings

Change the settings to suit your speakers and units to the environment in which you are using them. Before making any changes, read the descriptions of the settings, note the factory settings and ranges, and refer to the equipment�s instructions.

1
SIZE
Set the size to suit your speakers

LARGE:For speakers that can reproduce a full sound range, particularly the bass range below 100 Hz. SMALL: For speakers that cannot adequately reproduce the bass range. This setting is sufficient for most speakers if you are using a subwoofer. NONE: For speakers you haven�t connected (center or surround). The factory settings are: FRONT: LARGE CENTER and SURROUND: SMALL For the subwoofer (SUB-WFR), select YES if you have connected one (factory setting), or NO if you have not.

2
DISTANCE
Enter the distance of the front, center and surround speakers from the seating position
Change the distance so that the sound from all the speakers (except for the subwoofer) reaches you at the same time. You can select distances between 3 and 30 feet at one-foot intervals. The factory settings are: FRONT and CENTER: SURROUND: 10 FEET 5 FEET

Press at the same time to enter the setting mode.
w q SFC MODE

3
FILTER
Change the cut-off for bass output from the front speakers
If you set the front speakers to �SMALL�, the filter is set to 100 Hz. Raise the cut-off if the bass from the front speakers is unsatisfactory so that this bass is output through the subwoofer. You can raise the cut-off from 100 Hz to either 150 Hz or 200 Hz.

4
D-INPUT
Digital input

Change these settings to suit the connections you have made to the three digital input terminals, COAX, OPT1 and OPT2, so that the correct source is selected when you turn [INPUT SELECTOR]. The factory settings are: CD: COAX DVD:OPT 2 TV: OPT 1

5
Adjusting speaker output level

Adjust the level of the other speakers based on the output of the front speakers. (Adjust the volume of the front speakers with [VOLUME].) C (center), SR (surround right), and SL (surround left) can be adjusted between �10 dB and +10 dB, with 0 being the level of the front speakers. Adjust center and surround output to the same apparent level of the front speakers. For SW (subwoofer), you can select �---� so there is no output, �MIN� for minimum output, a level between 1 and 19, or �MAX� for maximum output. Adjust subwoofer output so it is balanced with the front speakers. Subwoofer output is easily influenced by the source. You can also change its level while playing something for better effect (\ page 13).

Turn SPEAKERS on.
SPEAKERS

8
RQT6193