Note ¡You cannot record a source connected through a digital terminal. When recording CD, DVD, or TV, ensure the source is connected through the corresponding analogue terminals (\ pages 6�7) and �ANALOG� input is selected (\ page 18). ¡When you select DVD 6CH INPUT mode, only sound from the front left and right channels is recorded.
A
Recording on a tape or MD deck, or VCR
TAPE MONITOR
1
INPUT SELECTOR
You can record to a tape deck connected to TAPE/MD (or TAPE) REC (OUT) or to a VCR connected to VCR 1 (or VCR) OUT. See the recording unit�s operating instructions for details on how to prepare it for recording. When recording with a tape or MD deck, you can record any source except TAPE/MD (or TAPE). When recording with a VCR, you can record any source except TAPE/MD (or TAPE) or VCR 1/2 (or VCR).
1
Turn [INPUT SELECTOR] to select the source to be recorded. If you selected �VCR 1� in step 1, set [VCR 1 l, VCR 2 k] to the required position. Begin recording.
Follow your recording unit�s operating instructions. SA-DX1050 only
2
2
VCR 1 VCR 2
3
B
TAPE MONITOR
4
B
Begin the source to be recorded.
Follow your equipment�s operating instructions.
To monitor sound being recorded onto a tape deck
It is possible to check the sound being recorded if your tape deck is a 3 head system.
Press [TAPE MONITOR] on this unit and set the monitor button on the tape deck to �TAPE�.
Press [TAPE MONITOR] once again to turn it off.