10.12. Replacement for the pinch roller ass�y and head block
· Follow the (Step 1) - (Step 2) of Item 10.2 - Disassembly of Top Cabinet · Follow the (Step 1) - (Step 6) of Item 10.3 - Disassembly of CD Lid · Follow the (Step 1) of Item 10.4 - Disassembly of the Rear Panel · Follow the (Step 1) - (Step 3) of Item 10.5 - Disassembly of the CD Mechanism Unit · Follow the (Step 1) - (Step 3) of Item 10.9 - Disassembly of the Front Panel Unit · Follow the (Step 1) - (Step 5) of Item 10.10 - Disassembly of the Deck Mechanism Unit * The mechanism as shown below is for DECK1. For DECK 2, perform the same procedures. Step 1 Release the 2 claws, and then remove the pinch roller (R), (F). Step 2 Release ther 2 claws, and then remove the head connector.
Step 3 Remove 2 screws.
10.13. Replacement for the Deck motor ass�y, capstan belt A, capstan belt B and winding belt
· Follow the (Step 1) - (Step 2) of Item 10.2 - Disassembly of Top Cabinet · Follow the (Step 1) - (Step 6) of Item 10.3 - Disassembly of CD Lid · Follow the (Step 1) of Item 10.4 - Disassembly of the Rear Panel · Follow the (Step 1) - (Step 3) of Item 10.5 - Disassembly of the CD Mechanism Unit · Follow the (Step 1) - (Step 3) of Item 10.9 - Disassembly of the Front Panel Unit · Follow the (Step 1) - (Step 5) of Item 10.10 - Disassembly of the Deck Mechanism Unit Step 1 Release the 2 claws, and then remove the head connector. Step 2 De-solder plunger point. Step 3 Remove the Deck Mechanism P.C.B.