|
|
|
Usuarios conectados
Actualmente hay 6043 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
S-A790VLR
FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
( for Front Speaker)
The cosmetic baffle assy is attached to the cabinet by 4 external hexagon socket screws. To detach the cosmetic baffle assy, loosen these screws by the hexagon screw driver. Then carefully disconnect the wires of the mid-range and the tweeter mounted on the cosmetic baffle assy. To attach the cosmetic baffle assy, replace it on the cabinet correctly and secure with 4 screws. The mid-range is attached to the cosmetic baffle assy by 4 internal screws. To detach it, unfasten those screws. When attaching it, face its terminal downward. The tweeter is attached to the cosmetic baffle assy by 2 internal screws. To detach it, unfasten those screws. When attaching it, face its terminal downward. The network assy is attached to the bottom board by one internal screw and adhesive. To detach it, unfasten that screw and pry it out.To attach it, apply adhesive to the bottom board. Then press it to the bottom board, and secure with one screw.When attaching the network assy, do it carefully so that each wire is not touched.
( for Super Woofer)
The cosmetic baffle assy is attached to the cabinet by 4 external hexagon socket screws. To detach the cosmetic baffle assy, loosen these screws by the hexagon screw driver. Then carefully disconnect the wires of the woofer mounted on the cosmetic baffle assy. To attach the cosmetic baffle assy, replace it on the cabinet correctly and secure with 4 screws. The woofer is attached to the cosmetic baffle assy together with the cosmetic ring assy by 4 internal screws. To detach the woofer (cosmetic ring assy), loosen these screws. To attach the cosmetic ring assy, fit the notch of the cosmetic ring to the projection of the cosmetic baffle assy. To attach the woofer, face its terminal downward. To attach the cosmetic ring assy and woofer, replace it on the cosmetic baffle assy correctly and secure with 4 screws. The network assy is attached to the bottom board by one internal screw and adhesive. To detach it, unfasten that screw and pry it out. To attach it, apply adhesive to the bottom board. Then press it to the bottom board, and secure with one screw. When attaching the network assy, do it carefully so that each wire is not touched.
SCHEMATIC DIAGRAM
Network ASSY (SWN1654)
Red Blue 1.2mH
IN
Black
Super Woofer
White
Network ASSY (SWN1680)
Red 0.39mH 82µF Green
IN
Black 1.8µF White White
Mid
Tweeter
Red
2
|
|
|
> |
|
