GUIDE TO INTERNAL COMPONENTS
Removal and rearrangement of the refrigerator and freezer shelves It is possible to position the shelves according to your needs. The glass shelves are strong enough to hold bottles, milk cartons and heavy food; however, please don�t bang them down on the shelves. To remove the shelves: slide the shelf out as far as it comes, then lift it up and take it out. Removal of the crisper drawer or the meat drawer: � slide the drawer out as far as it comes; � with one hand underneath the drawer, lift it up and pull it out; � the drawer will come out of its runners and can be pulled out further; � to remove completely, the drawer will need to be rotated: front end up, back end down. To remove the glass cover of the drawer � Lift the front of the frame 10 cm, then with your other hand, lift the back of the frame and pull it out. To put the glass cover of the drawer back � Insert the back of the frame in the supports on the refrigerator walls and lower it back into place. Meat drawer temperature control � The cold air flows into the meat drawer through an opening between the refrigerator and the freezer compartment. In this way the temperature inside the meat drawer is lower than in other parts of the refrigerator. Set the slider for higher or lower airflow. � If you wish to store vegetables in the meat drawer, move the control all the way to the left to the vegetables setting. This avoids possible frost damage to the vegetables. Crisper drawer moisture control � The control may be set to any position between the minimum and maximum setting . � This position excludes damp air from the drawer for better preservation of fruit and vegetables with peel. � This position keeps damp air inside the drawer for better preservation of leafy vegetables. Removal of the freezer compartment baskets � Slide the basket out as far as it comes. � Lift the front up to release the basket from the retainer. � Pull out the basket completely. Removal of the ice storage bucket � Press the button located on the bottom side of the ice storage bucket. � Lift the bucket up and out of the base and empty it. � Reinstall the bucket in the freezer compartment inner door.
