Basic Playback
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
1 Load a cassette
Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Do not apply too much pressure when inserting. � The VCR turns on automatically. � The counter is automatically reset to �0:00:00�. � If the cassette�s record safety tab has been removed, playback begins automatically.
2
POWER
SHUTTLE ring
2 Start playback
To stop playback
Press PLAY ( 3 ). � Tape speed (SP or EP) is automatically detected.
REW PLAY
FF
POWER
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 )
MENU
VIDEO (MONO)L�AUDIO�R
SP EP VCR
on the front panel.
CH
SP/EP
REC STOP/EJECT PAUSE
OK
To rewind the tape
STOP/EJECT (7/0) Press REW ( 1 ) (or turn the SHUTTLE ring on the front panel to the left).
To fast-forward the tape
Press FF ( ¡ ) (or turn the SHUTTLE ring on the front panel to the right).
To eject the tape
POWER Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running. � You can also eject the cassette with the VCR turned off.
1 4 7
2 5 8 0
3
2
To turn off the VCR
Press POWER.
6 9
4
INFORMATION
This VCR is equipped with SQPB (S-VHS QUASI PLAYBACK) that lets you watch tapes recorded in the SVHS format with regular VHS resolution. � SQPB does not deliver Super VHS resolution. � S-VHS recording is not possible with this VCR.
2
1
REW ( 1 )
FF ( ¡ )
3
STOP ( 7 )
Clean the video heads using a dry cleaning cassette � TCL-2UX � when:
� Rough, poor picture appears while a tape is played back. � The picture is unclear or no picture appears. � �USE CLEANING CASSETTE� appears on the screen (only with �SUPERIMPOSE� set to �ON�: pg. 39.)