RV-B550BU <Front Cabinet Assembly> Removing the LED boards (See Fig.20)
Prior to performing the following procedure, remove the front cabinet assembly and the rear cabinet assembly. 1. Remove the two screws N and two screws O attaching the LED boards on the speaker. 2. Disconnect the harness from connector FW251 and FW261. N
Speaker Speaker FW261
P
FW251
Q
P
O
Removing the speakers (See Fig.20)
Prior to performing the following procedure, remove the front cabinet assembly and the rear cabinet assembly. 1. Remove the eight screws P attaching the right and left speakers on the inside of the front cabinet assembly. 2. Remove the screw Q attaching the speaker terminal.