WHIRLPOOL RT14ZKXDW02
Manual de Usuario

Adjusting
To remove a shelf:
I. 2. 3. 4.

the refrigerator

shelves

Adjust shelves to match the way you use your refrigerator. Remove all items from the shelf. Slide shelf straight out to the stop. Lii the front. Slide shelf out the rest of the way.

To replace a shelf: 1. Fit back of shelf on top of shelf guide with wire stops on the bottom of the guide. 2. Lift front of shelf. 3. Slide shelf in until it clears all stops. 4. Lower front of shelf into place.

Removing

the crisper

and cover
then the back.

To remove the crisper: 1. Slide crisper out to the stop.
2. Lift the front. 3. Slide out the rest of the way. 4. Replace in reverse order.

To remove the cover: 1. Lift the front, then the back.
2. Lift cover up and out.

To replace the cover: 1. Fit notches in back of cover into the nubs
at the rear of the refrigerator cabinet. 2. Lower front into place.

Slide out to the stop, lift the front and slide out the rest of the way.

Using

the ice cube trays

If you don�t use cubes, they may shrink. The moving cold air starts a slow evaporation. The longer you store cubes, the smaller they get. To remove ice: 1. Hold tray at both ends. 2. Twist slightly.

10
WITH (IUESTIONS OR COMMENTS