One-touch recording of an entire CD (ONE TOUCH EDIT.....recording of all tracks)
When the O.T.E. key is pressed while the CD player is in the stop mode, recording of a CD can be started at the same time as playback. When the DM-SG7 (option) is connected and the input selector is set to �MD�, the same procedure can be used to make a one-touch recording of the entire MD on tape.
Recording preparations are required.� (Steps 1 to 4)
1 Check that the CD player is in the stop mode.
If it is in play mode
7
÷ When recording a CD, set the input selector to CD.
Step 2 also can be executed after the order of the tracks has been programmed.
2 Press the O.T.E. key.
O.T.E.
÷ Recording of CD starts at the same time as playback. ÷ When the tape direction is changed at the end of the tape, no sound is recorded on the guide tape. When interruption of a track is to be avoided, restart recording from the very beginning of the reverse side according to �Recording�. �
To end recording in the middle
Knowledge sections Application Basic Preparation section
7