BLAUPUNKT RPD 552
Manual de Usuario

Radio Reception
Seek Tuning
ENGLISH

Preset Scan Tuning
or
FM

Receiving the Memorized Stations
to select the desired radio band.

1.

Press the

AM

to select the desired band.

FM I � FM II � FM III or AM I � AM II

1. 2.

Press the Press the

AM

or .

FM

1. 2.

Press the Press the

AM
1

or 6/

FM

to select the desired radio band.

momentarily.

The unit will scan preset memory for the 12 stations from the AM I/AM II band or the 18 stations from the FM I or FM II and FM III bands. The unit will stop at each preset station for 8 seconds, before continuing to the next preset station. Press the again to stop Preset Scan Tuning and remain this on the selected frequency.

2.

Press the or to tune in stations. Seek tuning automatically stops at a broadcasted frequency. When tuning to FM stereo broadcasting stations, the � � stereo indicator will light up in the display window.

Local/Distant (LO/DX) Selection
This feature is used to select the strength of the signals at which the radio will stop during Seek Tuning. Press the LD/SENS for more than 2 seconds to select the Local setting and only the strongest (local) stations will be received. The �lo� indicator appears in the display window. Pressing again for 2 seconds will select the Distant setting and the radio will stop at a wider range of signals, including weaker more distant stations. The �lo� indicator will go out on the display window. The �Distant� setting is the recommended default mode of reception.

Manual Tuning Memorizing Stations Automatically (Travel Store) 1. 2.
Press the
AM

or

FM

to select the desired band.

Press the or and hold for more than 0.5 second to activate the manual tuning mode. Press again to tune in to stations. After 4 seconds duration of completing Manual Tuning, the tuning control will revert to the Seek Tuning mode.

1. 2.

Press the

AM

or

FM

to select the desired band.

Hold the AM or FM pressed for longer than 2 seconds. Up to 6 stations with strong signals will be automatically stored in preset memory for the selected band.

Note
This function is available for FM III and AM II.

Scan Tuning 1. Press the 2.

AM

or

FM

to select the desired radio band.

Memorizing Only the Desired Stations
A total of 30 stations (18 for the FM I, FM II and FM III, 12 for AM I and AM II) can be stored in preset memory.
AM FM

Press the . The unit will scan the selected radio band for stations. Press the again to stop Scan Tuning and remain on this selected frequency.

Tips
When tuned in to broadcasting stations, the antenna indicator on the display window is lit.

1. 2. 3.

Press the Press the

or or

to select the desired radio band. to tune in stations.

Press and hold the desired preset memory button 1 6/ for about 2 seconds until the frequency indicator flashes twice. The number of the pressed preset memory button appears on the display window.

Note
If/when you store another station on the same preset number button, the previously stored station is replaced with new one.

E-4