Selecting the mode of the remote
Set the remote mode using the USE MODE button (wl) and the remote mode buttons (2).
Selecting the command mode
To check the mode of the remote
Press USE MDOE. You can check the remote by the indicator.
Mode Indicator lights
AV1 AV2 2nd room 3rd room
once twice
Advanced Remote Operations
once (for a while) 3 times
You can switch the command mode (AV1 or AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver.
Press 1 (AV1) (or 2 (AV2)) while pressing down USE MODE.
The indicator lights once (twice for AV2), then the command mode switches.
Setting to the 2nd room mode.
You can use the remote to select the function for the 2nd room (2nd room mode). You can use the function buttons only for the 2nd room.
Press 2ND ROOM while pressing down USE MODE.
The indicator lights for a while, then the mode switches to the 2nd room mode.
Tips
� If you press a function button while pressing down 2ND ROOM, you can select the function for the 2nd room even though the mode is not set to the 2nd room mode. � If you press 2ND ROOM only, you can output the source signal of the current function of the receiver to the amplifier in the 2nd room.
Setting to the 3rd room mode.
You can use the remote to select the function for the 3rd room and adjust the volume in the 3rd room (3rd room mode). During 3rd room mode, you can adjust the volume of speakers in another room when you set the receiver to output the sound using SPEAKER terminals. You can use the function buttons and MASTER VOL +/� buttons only.
Press 3 (3RD) while pressing down USE MODE.
The indicator lights 3 times, then the mode switches to the 3rd room mode.
