Note that the function buttons are factoryset as described in the table above. If you want to change the factory setting of the buttons to match your particular components, do the procedure �Programming the remote� on page 10.
AV1, AV2, 2ND buttons
5 MUTING button
Press to mute the sound.
6 MASTER VOL +/� buttons
Press to adjust the volume level of all speakers at the same time.
7 MAIN MENU button
Press to select the command mode of the remote (page 10).
M1, M2 buttons
Press to select the cursor mode of the receiver (EQ, SURR, LEVEL, SET UP or CUSTOMIZE).
8 ON SCREEN button
Press to use Macro Play function (page 15).
MULTI CH button
Press to select the multi channel input sources.
SOURCE button
Press to display the menus of the receiver on the TV screen (only when the ALT button is not lit).
9 V/v/B/b/ENTER/EXECUTE button
Press to select 2ND AV output.
4 SOUND FIELD buttons PRESET button
After pressing the MAIN MENU, AV MENU, or TOP MENU/GUIDE button, use the button to make specific settings, then press the button to enter the selection.
0 TEST TONE button
Press to select a preset sound field (ex. CINEMA STUDIO EX A, B, C).
AUTO DEC button
Press to output a test tone.
Press to set the receiver to automatically select the appropriate sound field for the input signal. This button can be used only with receivers that have digital inputs.
ANALOG DIRECT button
continued
Press to select 2CH ANALOG DIRECT.
2CH button
Press to turn the sound field off and listen to 2 channel stereo sound. Multi channnel source is also downmixed to a 2 channel stereo sound.
MODE +/� buttons
