SONY RMAV3000
Manual de Servicio

RM-AV3000

qf EXIT button (page 89) Used to exit the setting menu. qg MENU button (page 88) Calls up the menu display of the buttons or keys that have menu function. qh OK button and Cursor Control buttons (page 9, 64, 88) qj SYSTEM CONTROL buttons (page 31) You can program up to 32 consecutive key operations to each of the three SYSTEM CONTROL buttons . You can automatically carry out the entire program by pressing one button. qk MORE button (page 32) Label keys change in the order from the first stage to the third stage and come back to the first, and so on, each time you press the MORE button in the system mode.
* Note on the VOLUME +/� and MUTING buttons
The Commander controls or mutes the TV�s volume when you select a visual component. The Commander controls or mutes the amplifier�s volume when you select an audio component. You can change this setting also (page 29).

Setting the Clock
Setting the clock for the first time after installing batteries
For the first time after installing batteries, the Commander is in the clock setting mode. �CLOCK� is displayed on the Mode Display key, and � �:� �� flashes on the Clock Display key, and �STD TIME� and �DS TIME� on the Label keys are flashing.

1 Select STD TIME (standard time)

or DS TIME (daylight saving time).
If the summer time (daylight saving time) is used in your area, press the DS TIME key when it is in the summer time. If not, press the STD TIME key. If the summer time is not used in your area, press the STD TIME key.
or

Note on the power on and off of the display of the Commander
To turn on the display, press any button except the COMMANDER OFF button. To turn off the display, press COMMANDER OFF, or if you don�t use the Commander, the display automatically turns off after 10 minutes. This interval can also be changed (page 74).

The selected STD TIME or DS TIME key lights. �SET� and �SU� flash and �12:00 AM� lights on the Clock Display key.

4