The self-cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the cycle safely.
Before You Start
1. Clean the shaded areas by hand. They do not get hot enough during the Self-Clean cycle for soil to burn away. Use hot water and detergent or a soapy steel-wool pad on... the frame around the oven. l the inside of the door, especially l the part outside the oven seal.
DO NOT clean the fiberglass seal. DO NOT move it or bend it. Poor cleaning and poor baking will result
Remove the broiler pan and any pots or pans you may have stored in the oven. They can�t stand the high heat. Wipe out any loose soil or grease. This will help reduce smoke duringthecleaningcycle. If your oven has a rotisserie, make sure the motor socket cover is closed. Put oven racks on the second and fourth guides (counting from bottom to top). During the SelfCleaning Cycle they will darken and become harder to slide. See tips on page 20. If you want the oven racks to remain shiny, clean them by hand. I
I
/ Clean Door Clean Frame /
Chrome reflector
bowls must not be cleaned
in the oven. They will discolor.
Turn on the vent hood or other kitchen vent during the cleaning cycle. This will help remove smoke, odor and heat that are normal during the cycle.
oven cleaners in your oven. Damage the porcelain finish-may occur.
SPECIAL CAUTIONS: DO NOT use commercial
to
DO NOT force the Lock Lever, you
could bend or break it. The lever is designed to stay locked until the oven is cool enough to safely open. Wait until it moves freely
DO NOT use foil or other liners in the oven. During the cleaning cycle foil can burn or melt and damage the oven surface.
