JVC RD-T70UD
Manual de Usuario

Presetting Stations
You can preset up to 30 FM stations and up to 15 AM stations into memory.

Manual Presetting (Using the Remote Control) [RD-T70BU Only]���
TUNER BAND

Auto Presetting (Using the Unit) �
In each band, you can automatically preset FM-30, AM-15 stations. Preset numbers will be allocated as stations are found, starting from the station currently tuned to and moving up the frequency.
(Band select)
TUNER BAND
AUTO PRESET

MANUAL/ PRESET TUNING

Number key(s) (hold for 2 seconds)

(On the Unit)

I Select a band by pressing the TUNER 1.
BAND button.

(Auto preset)
TUNER BAND
AUTO PRESET

(for 2 seconds)

I Press the 7 button on the Unit until �MAN2.
UAL (Manual Tuning mode)� appears on the display.

I Select a band (AM or FM) by pressing the 1.
TUNER BAND button.

I Press the 4 or ¢ button to tune in a station. 3. I Set the preset number by pressing and hold4.
ing the number key on the Remote Control until �STORED� appears on the display.
� � To preset numbers 1 to 10: Press the number key and hold it down for 2 seconds. To preset numbers 11 to 19: Press the +10 button, then press the second number key (1 to 9) and hold it down for 2 seconds. To preset numbers 21 to 29: Press the +10 button twice, then press the second number key (1 to 9) and hold it down for 2 seconds. To preset number 30: Press the +10 button twice, then press and hold 10 button.

I Press the TUNER BAND button for more 2.
than 2 seconds.
�AUTO� appears, and then auto presetting starts.

I Repeat steps 1-2 for the other band. 3.
I
If you want to change any of the auto preset stations, follow the procedure for Manual Presetting. CAUTION: To prevent the preset stations from being erased because of a power failure, etc., install memory backup batteries in the System.(See page 2.) Otherwise, they will be erased in approx. half a day.

� �

Manual Presetting (Using the Unit) �
(Station Select)
MULTI CONTROL

Example: Preset number = 12

TUNER BAND
AUTO PRESET
MANUAL/ PRESET TUNING MANUAL/ PRESET TUNING

I Repeat steps 2 - 4 for further presetting. 5.
To change the preset stations, repeat the same steps as above.
MANUAL/ PRESET TUNING

(Preset No. Select) (for 2 sec)
MANUAL/ PRESET TUNING

MULTI CONTROL
MANUAL/ PRESET TUNING

(Press & hold )

To Change the FM Reception Mode
The �STEREO� indicator lights up and you can hear stereo effects, when a program is broadcast in stereo. However if an FM stereo broadcast is hard to receive or noisy, you can select Monaural mode. Reception improves, but you lose any stereo effect.

I Select a band by pressing the TUNER 1.
BAND button.

I Press the 7 button on the Unit until �MAN2. I Press the 4 or ¢ button to tune in a sta3.
tion.

UAL (Manual Tuning mode)� appears on the display.

Press the TUNER BAND button to select FM MONO mode.
The �MONO� indicator lights up on the display. To restore the stereo effect, press the TUNER BAND button to select FM Auto mode. The �MONO� indicator goes out.

I Press the 7 button for 2 seconds or more. 4.
The preset number and band/frequency are alternately displayed for 5 seconds.

I Within 5 seconds, repeatedly press the 4 or 5.
¢ button until the preset number you want appears, then press and hold the 7 button until �STORED� appears on the display.

I Repeat steps 2-5 for further presetting. 6.

To change the preset stations, repeat the same procedure as above.

6