JVC RD-T50RLB
Manual de Usuario

I Turn the Jog dial to select the source. 6.
The source name changes as follows:

To cancel the timer, press the TIMER1/2 button to turn off the Timer 1/2 indicator ( TIMER1/2). To reactivate the timer, repeatedly press the TIMER1/2 button until the Timer 1/2 indicator ( TIMER1/2) remains lit again. To confirm the timer settings, repeatedly press the TIMER1/2 button. To change the timer settings, repeat the setting procedure from the beginning. Tip: The timer works even if the Unit is turned on. So, while listening to a CD or radio, you can use the timer to know the set time. For example, if you are listening to the radio, you can set the timer so that the melody will be played at the set time, instead of the radio. In this case, the playback sound slowly fades in.

CD

TUNER

MELODY

I Press the 7.

TIMER1/2 button and select a source item you want.
When the source is CD: 1. Turn the Jog dial to select either �TRACK NO� (for Normal Play) or �RANDOM� (for Random Play). 2. Press the TIMER1/2 button. When �TRACK NO� is selected, �TRACK- 1� blinks. Go to steps 3 and 4. When �RANDOM� is selected, the current volume level blinks. Go to step 8 . (When �TRACK- 1� blinks.) 3. Turn the Jog dial to select another track, if you want. 4. Press the TIMER1/2 button. The current volume level blinks. Go to step 8 . When the source is TUNER: 1. Turn the Jog dial to select FM AUTO, FM MONO, or AM. 2. Press the TIMER1/2 button. The preset number blinks. (e.g. �P-1�) 3. Turn the Jog dial to select the preset number you want to listen to. 4. Press the TIMER1/2 button. The current volume level blinks. Go to step 8 . When the source is MELODY: The current melody number (1 - 8) blinks and the melody is played. 1. Turn the Jog dial to select one of melodies. 2. Press the TIMER1/2 button. The current volume level blinks. Go to step 8 .

5-Minute Snoozing (SNOOZE)
When the Timer 1/2 turns on, if you wish, you can activate 5-minute snoozing function to temporarily stop playing source.

While the timer is activating, press the SNOOZE button.
The Unit turns off for 5-minute for snoozing. (The Timer 1/2 blinks.) Notes: � Pressing and holding the SNOOZE button for more than 2 seconds cancels the timer. � The maximum number of times to repeat snoozing is limited to 10. � Snooze function does not work when the other timer is used.

Setting the SLEEP Timer
Use the Sleep Timer to turn the Unit off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your Unit will turn off by itself rather than play all night. I You can only set the Sleep Timer when the Unit is on and a source is playing.

I Play back a CD or tune in to a desired sta1.
tion.

I Turn the Jog dial to set the volume level. 8.
The volume level changes between �MIN (0)� and �MAX (32)�.

I Press the SLEEP button. 2.
The �SLEEP� indicator blinks.

I Set the length of time you want the source 3.
to play before shutting off.
Each time you press the SLEEP button, it changes the number of minutes shown on the display in this sequence: 10 = 20 = 30 = 60 = 90 = 120 = Cancelled = (back to the beginning) The �SLEEP� indicator will stop blinking after 5 seconds and remains on (The backlight dims.). Then, the display returns to the one before you set the Sleep Timer. The Unit is now set to turn off after the number of minutes you have set. To Confirm the Sleep Time Press the SLEEP button once. The remaining sleep time is displayed, and after 5 seconds, the original display returns. To Cancel the SLEEP Timer Setting Press the SLEEP button until the �SLEEP� indicator goes off on the display. Turning off the Unit also cancels the SLEEP Timer. �

I

9. Press the TIMER1/2 button.
The TIMER1/2 is set and the Timer 1/2 indicator ( TIMER1/2) remains lit.

I Prepare the music source according to the 10.
source set in step 6.
CD: Load a CD. TUNER/MELODY:No preparation is necessary. � If no CD is loaded with the CD source selected, the MELODY 1 will be activated instead of a CD.

I Turn off the Unit (Standby mode). 11.
When the set time comes �����
When the set time comes, the Unit automatically turn on and plays the source. During this time, the Timer 1/2 indicator ( Timer 1/2) blinks. The timer will automatically turn off in 1 hour. In case that the source is CD, the Unit automatically turns off when playing back all the tracks is finished. � To temporarily cancel the timer, press the TIMER 1/2 button once or change the volume with the VOLUME control on the Unit or the VOLUME +/- button on the Remote Control. Then the Timer 1/2 indicator ( TIMER 1/2) remains lit. (When the source is CD or TUNER, pressing any button on the Unit cancels the timer.)

11