SONY RCDW2000ES
Manual de Usuario

3 Press one of the DISC 1-5 A buttons on
DECK A and place a CD on the disc tray. PressA on DECK A again to close the disc tray.

Normal speed SynchroRecording
The disc is recorded at the same speed as the playing CD. You can hear the sound during recording. To use Make-Disc SynchroRecording, set �Make Disc� in the menu to �On� beforehand (page 36). When using the remote, set DECK A/DECK B to DECK B.

When you perform Make-Disc SynchroRecording, the current disc in DECK A is used to record. When you perform Synchro-Recording, you can choose the disc which you want to record, and the play mode. If you select �ALL DISCS� even though you want to record only one disc, discs you did not intend to record may be recorded.

4 Press CD SYNCHRO HIGH.
DECK B stands by for recording, and DECK A stands by for playing. When you place a CD-R or CD-RW in the deck, the unit optimizes itself for the best possible recording and �OPC� appears temporarily in the display. If �Not Blank� appears, make sure that the blank disc is placed correctly.

CD SYNCHRO NORMAL

DECK A/DECK B
Nx

CD SYNCHRO H NORMAL x

5 After �New Track� appears in the
display, press N on DECK B (or H on the remote) to start recording.

High-Speed Synchro-Recording starts. DECK A and DECK B automatically stop after recording.
To stop recording

Press x.
Notes

� When you make Synchro-Recording in programmed order, the recording speed automatically changes to Normal speed. You can perform only Normal speed Synchro-Recording. � If you select �ALL DISCS� even though you want to record only one disc, discs you did not intend to record may be recorded.

1 Do steps 1 to 3 of �High-Speed 2 Press CD SYNCHRO NORMAL.

Synchro-Recording� on page 24.

DECK B stands by for recording, and DECK A stands by for playing.

Recording/Editing

3 After �New Track� appears in the
display, press N on DECK B (or H on the remote) to start recording.

Synchro-Recording starts. DECK A and DECK B will automatically stop after recording.
continued

25