WHIRLPOOL RC17MP
Manual de Usuario

Changing Optional Programs
1. Open oven door. Display shows "door". If door is closed or RESET pad is pressed before finishing programming sequence, oven exits programming mode. Press pad 1 for five seconds. After five seconds, signal sounds. Display shows �P� and active menu. Press hidden enable pad. Locate hidden enable pad to the immediate left and slightly down from the MENU 1 pad. Displays shows "OP:1X". OP represents optional program mode, first number represents option number and second number represents functions currently selected for option. Press START pad to advance to other options. See chart for function options. Press STATUS pad to change option. Press START to save changes. Repeat steps 4-5 to change additional options. Press hidden enable pad to return to programming mode. Press RESET pad or close oven door to exit programming mode.

Option End of cycle signal tone

Description Off Continuous tone* 5 continous tones 5 tones, 5 cycles

Code OP:10 OP:11 OP:12 OP:13 OP:20 OP:21 OP:30 OP:31 OP:40 OP:41 OP:50 OP:51

2.

3.

Tone when pad is pressed

Off On*

Control panel resets when door is opened

Off* On

4. 5. 6. 7.

End of cycle signal volume Loud* Medium User time limit Off On*

*As shipped from factory

Modifying User Time Limits
Summary of Optional Programs 1. Open oven door. 2. Press 1 pad for five seconds. 3. Press hidden enable pad. 4. Press START pad to review options. 5. Press STATUS pad to change option. 6. Repeat steps 4-5 to change additional options. 7. Press hidden enable pad to return to programming mode. 8. Press RESET pad or close oven door. A user defined time limit may be put on each set of programs associated with each available menu pad. For example, if the user time limit for MENU 1 is 30 minutes, the total cook time of all available stages for a single number pad may not exceed 30 minutes. 1. Complete steps 1-3 of "Changing Optional Programs". 2. Press desired menu pad to change. Present user time limit displays. Display shows active menu. 3. Press numbers to enter desired heating time limit. Display shows new heating time limit. 4. Press corresponding menu pad again to save time limit. For example, if changing heating time limit for MENU 1, press MENU 1 pad. 5. Press RESET pad or close oven door to exit programming mode. Summary of Modifying User Time Limits 1. Open oven door. 2. Press pad 1 for five seconds. 3. Press hidden enable pad. 4. Press desired menu pad to change. 5. Enter desired heating time limit. 6. Press corresponding menu pad. 7. Press RESET pad or close oven door. 3