Adjust the level of the selected channel as desired.
ADJUST
CH/LEVEL
T/V
or
� The LFE level can be adjusted within the range of -10~0 dB and other channel levels within the range of -15~+15 dB. � In general, we recommend the LFE level to be adjusted to 0 dB.(However, the recommended LFE level for some early DTS software is -10 dB.) If the recommended levels seem too high, lower the setting
T/V
as necessary. � If the channel display disappears, start from the step 1 again.
3
Repeat the above steps 1 and 2 to adjust each channel level.
1
2
3
4
1
2
3
4
5
6
7
8
5
6
7
8
Memorizing the adjusted channel levels
M1
9
0
+10
9
0
+10
This unit gives two spaces(�REF.1� and �REF.2�) for memory of the adjusted channel levels. You can call the memorized again whenever you want.
MACRO
M2
M3
M1
MACRO
M2
M3
1
After doing the above steps 1~3 in �Adjusting the current channel level�, press the below button.
T/V T/V
MEMO/ENTER
ENTER
or � �REF. 1� is displayed and �1� flickers.
2
ADJUST
Select the desired space between REF. 1 and REF. 2.
1 2 3 4
Press below button.
3
T/V T/V
1
2
3
4
5
6
7
8
5
6
7
8
MEMO/ENTER
9 0
+10
9
0
+10
ENTER
MACRO
T/V
CH/LEVEL
M3
T/V
MACRO
M1 M2
or
M3
M1
M2
or
� The adjusted channel levels have now been memorized.
1 2 3 4 1 2 3 4
