BEFORE OPERATION
Plug in the oven. 1. The oven display will flash: 2. Press the STOP/CLEAR button. 3. The display will show: To set the clock, see below. When using the oven for the first time: Heat the oven using GRILL mode without food for 20 minutes. See note on page 9. 1. 2. x1 3.
SETTING THE CLOCK
There are two setting modes: 12 hour clock and 24 hour clock. 1. To set the 12 hour clock, press the COOKING MODE button and hold for 3 seconds, will appear in the display. 2. To set the 24 hour clock, press the COOKING MODE button once more after step 1, will appear in the display. x1 and hold for 3 seconds.
Example: To set the 24 hour clock to 23:35 1. Select the clock function. Select the 24 hour clock. 2. To enter the hours rotate the TIME/KG/POWER knob clockwise/counter-clockwise until 23 is displayed. 3. To change from hours to minutes press the COOKING MODE button once.
x1 and hold for 3 seconds. 4. To enter the minutes rotate the TIME/KG/POWER knob clockwise until 35 is displayed.
x1
x1
5. To start the clock press the COOKING MODE button once.
Check the display.
x1 NOTES: � If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set, the display will only show when cooking is complete. � If the electrical power supply to your microwave oven is interrupted, the display will intermittently show: after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased. � When you want to reset the time of day, follow the above example again.