SHARP R631
Manual de Usuario

BEFORE OPERATION

Plug in the oven. 1. The oven display will flash: 2. Press the STOP button, the display will show: 3. To set the clock, see below. 4. Heat the oven without food. (See page 10, Note 2). Using the STOP button Use the STOP button to: 1. Erase a mistake during programming. 2. Stop the oven temporarily during cooking. 3. Cancel a programme during cooking, touch twice.

1.

2.

STOP

x1

SETTING THE CLOCK
NOTE: Plug the oven in. The display will flash . Press the STOP button and the display will show . Set the clock according to the following instructions. If the power to the oven is interrupted, when it is plugged in again the display will flash . If this occurs when the oven is operating, the programme will be lost. The time of day will also be lost. The clock must be reset to the correct time of day. Example: To set the 24 hour clock to 23:35. (To set the 12-hour clock, press and hold the COOKING MODE button for 3 seconds. The display shows To set the 24-hour clock, press the COOKING MODE button again after step 3 below. The display will show

.)

STOP

The display flashes.
/KG/ %

x1

x2 x1

x1

x2 x1

x3

x3

1 x hold for 3 seconds.

Press to enter the 24-hour clock.

Enter the hours.

x1

x2 x1

/KG/ %

x1

x2 x1

x3

x3

Enter the minutes.

(Example)

7