&KDUJLQJ <RXU %DWWHU\
<RXU &KDUJHU
Your phone was packaged with either a rapid or travel charger. It is important that you fully charge your battery before you use your phone. Both chargers supply power to charge your battery while the battery is attached to your phone. If your phone is On, it can receive calls while using either charger. Note! NEVER attach the charger to a phone that does not have a battery installed.
UDSLG rapid
WUDYHO travel
1 If you have a rapid charger, plug the charger into a standard wall electrical outlet. If you have a travel charger, connect the appropriate AC power cord and phone charging cord to the travel charger. 2 Hold the phone with the display and keypad facing up. 3 Hold the small plug on the charger cord so the lightning bolt symbol ( ) is up.
4 Align the small plug on the charger cord with the connector on the bottom of your phone. The connector on the phone is above the lightning bolt symbol ( ).
N
t o
5 Press the plug into the connector until the plug �snaps� into place. The icon is alternated with the icon when the phone is powered on and the phone is charging.
fo
r
o c
e m m
r
al i c
u
e s
Note!
Do not twist while inserting or removing the small plug on the charger cord!
�
E
ric
o s s
n
c In
.
6 Continue charging the phone until the battery is fully charged. 7 To disconnect the charger, lift the plug connected to the phone upwards and pull it out.
&KDUJH2QO\ 0RGH
If your phone is off, attaching the charger will cause the phone to activate in charge-only mode. When this mode is activated, the message Charging Only appears in the display. Your phone is now fast (rapid) charging the battery. When your phone is fully charged, Battery Charged appears in the display. Note! You cannot make or receive calls when your phone is in chargeonly mode.
