Cleaning the grease filters
Clean the filter every month or every other month according to how much the hood is used. The cleaner the filters, the better it collects grease. Remove the filter by (see picture): 1. Grab hold of the handle and push the filter backwards. 2. Pulling the filter down at the front and removing it forwards. The filter is made of aluminium wires on which the grease collects. Clean the filter in hot water using a detergent, or in a dishwasher. Let the filter dry before putting it back. Note that a dishwasher may discolour the filter.
Before doing any maintenance work on the hood, disconnect it from the main supply by disconnecting the plug from the wall socket or unscrewing the fuse.
Cleaning the motor cover
It is also possible to clean the motor cover (see picture): 1. Remove the grease filter. 2. Remove the inlet ring (A) by turning it anticlockwise. 3. Remove the fan wheel by unscrewing the centre nut (B) on the fan wheel. Use gloves when removing the fan wheel. Clean all the plastic and metal parts with warm water and washing dergent. Replace in reverse order.
A
B
Changing the light
Turn off the power before changing the light. 1. Remove the lampglass by pushing the two snaps forwards (see picture). 2. Replace the damaged part with one of equal rating. To remove the light without damaging it, place a finger on the end of the light and pull gently.