|
|
|
Usuarios conectados
Actualmente hay 5706 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
3. HOW TO SET THE UNIT
Locate the correct code of the device's brand/model from the attached code list. Key in the code to function the unit as follow: 1) Hold set then press any key of the following keys: TV, VCR, CAB/SAT, DVD/VCD/HIFI. 2) Enter code (3 digits) 3) The led will blinking two time. * * After completion of the setting, if accurate, all the devices and functions can be controlled. Otherwise, the code may not be correct for your device. Please repeat the same process from steps 1) to 3) by entering other codes until getting the correct one for your device. Note: a) Do not exceed 5 seconds between each step. b) There might be other codes than the correct code, which can also control some, but not all functions. Suggest always to locate the very exact code.
4. HOW TO GET THE CODE DISPLAY (3 DIGITS)
STEP1 STEP2 STEP3 Hold set then press 1 simultaneously, and release, the count of blinking represents the numeral of the 1st digit. Hold set then press 2 simultaneously, and release, the count of blinking represents the numeral of the 2nd digit. Hold set then press 3 simultaneously, and release, the count of blinking represents the numeral of the 3rd digit.
5. HOW TO WORK WITH "QUICK SEARCH"
In cast the code could not be located from the code list, please try quick search: STEP1 Turn on the power switch of the controlled device. STEP2 Press one device key which you want to control. STEP3 Hold set 3 seconds then release and the quick search mode is on with the led blinking. STEP4 If the on/off switch of controlled device has action�Press set immediately and release. * After completion of the quick search, if accurate�all the devices and functions. can be controlled, otherwise, the code may not be the very correct one for your device. Please repeat step 1-4 until getting the correct code.
6. HOW TO SWITCH OVER TO DIFFERENT DEVICE
Press any key of the following keys: TV, VCR, CAB/SAT, DVD/VCD/HIFI to quit the first device mode.
7. CODE LIST ON SETUP MODE OR QUICK SEARCH MODE DEVICE NAME
TV VCR CAB/SAT DVD/VCD/HIFI
FOR DEVICE
TV/CTV/TXT VCR CABEL/SATELLITE DVD/VCD/HIFI
TOTAL CODES
290 255 186 240
ACTIVE DEVICE CODE
001-290 001-255 001-186 001-240
8. MEMO OF BRAND & MODEL
Please fill the following form according to your device (including brand, model and code) so that you could quickly set the remote controller.
DEVICE TV VCR: CAB/SAT: DVD/VCD/HIFI:
BRAND
MODEL
CODE
2
|
|
|
> |
|
