|
Usuarios conectados
Actualmente hay 6043 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
THEFT PROTECTION
KeyCard theft protection
A KeyCard is included with your car radio. The radio can also be operated with a second KeyCard. If one KeyCard becomes lost or damaged you can obtain a replacement through your Blaupunkt dealer. If you use two KeyCards, the settings of the first KeyCard are adopted by the first KeyCard. You can, however, store the following functions separately: station button allocation, bass, treble, balance and fader settings, loudness, traffic announcement volume, beep volume and equalizer adjustment. In addition to this, the last values selected for the waveband, station setting, traffic announcements, RDS, REG, scan time, search sensitivity, initial volume and SHARX are stored. This means that the basic settings you have selected are made as soon as the KeyCard is inserted.
� Push the KeyCard with the carriage in
the direction of the arrow (2) carefully as far as the stop.
� Close the control unit (arrow 3).
Note: If the wrong kind of card, such as a cashpoint card, is inserted into the device, �Wrong KC� will appear on the display. Remove the incorrect card, and insert a KeyCard that is known to the device.
Removing the KeyCard
In order to unlock the control unit � press the button, 1. The control unit opens.
� Push the card with the �carriage� to the
right as far as the stop. � Remove the card from the control unit.
� Close the control unit.
Note: In order to prevent theft, remove the KeyCard whenever you leave the vehicle, and leave the control unit opened. For reasons of safety the control unit must always be closed when the vehicle is moving.
Inserting the KeyCard
In order to unlock the control unit
� press the
button, 1.
The control unit opens.
� Insert the KeyCard, as shown in the diagram (arrow 1), with the contact surfaces downwards.
�Training� a second KeyCard / Replacing the KeyCard
A second KeyCard can be �trained� as a substitute if the device is operating with the first KeyCard. If you want to �train� a second KeyCard
� insert the first KeyCard and switch the
device on.
2
1 3
� Press the MENU button, 8.
36
|
|
|
> |
|