CASIO PX-575R
Manual del propietario

Mixer Function

4

Use the [+]/[�] buttons to select on or off.
Example: To turn the channel off.

Using the Parameter Edit Mode
Editing the Parameters for Channels 1 through 16
In the Parameter Edit Mode, you can change the settings of ten different parameters (including tone, volume, and pan pot) for the channel you selected on the Mixer screen.

O f f Channe l
� Press the [ ] CURSOR button to return to the channel selection screen. � Pressing the MIXER button returns to the Tone Screen.

NOTE
� The MIDI data display shows only the data for the channels selected with the Mixer.

To change parameters

1 2 3

Press the MIXER button.
� This causes a pointer to appear on the display next to MIXER.

How Channel On/Off Works
The following describes what happens and what appears on the display when you turn a channel on or off. I On (on) This setting turns on the currently selected channel, which is indicated by a bar appearing at the bottom of the level meter for that channel. This is also the default setting for all channels when the digital piano is turned on. I Off (oFF) This setting turns off the currently selected channel, which is indicated by the absence of the bar at the bottom of the level meter for that channel.

Use the [ ] and [ ] CURSOR buttons to select the channel you want. Use the [ ] and [ ] CURSOR buttons to select the parameter whose setting you want to change.
Example: Select volume setting by displaying �Volume�. � Each press of the [ ] or [ ] CURSOR buttons cycles through the parameters. � You can use the [ ] and [ ] CURSOR buttons to change to another channel at any time during this procedure.
Indicates channel volume of 127

1 2 7 V o l ume
4
Use the number buttons or [+] and [�] to change the parameter setting.
Example: Change the setting to �060�.

On

Off

0 6 0 V o l ume
� Pressing the MIXER or EXIT button exits the parameter edit mode.

Editing DSP Channel Parameters

1

While Channel 16 is selected, press the [ ] CURSOR button.
� This selects the DSP channel. � Pressing the [ ] CURSOR button while the DSP channel is selected returns to Channel 16.

E-40