7.10 Removal of Analysis Block, LCD Block and Lens
1. Remove the lamp unit according to the section 7.9. "Removal of Lamp Unit". 2. Remove the A-P.C.Board block according to the steps 1 through 5 in the section 7.3. "Removal of A-P.C.Board". 3. Unscrew the 3 screws. 4. Lift the LCD block/lens side, remove the entire block in the state of the inclined.
5. Unscrew the 4 screws A to separate the lens and the LCD block, unscrew the 4 screws B to separate the analysis block and the LCD block respectively.
