Ampliar imagen

PANASONIC PT-LB20SU
Manual de Servicio

¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!

Contiene diagramas del circuito
Descargable
Formato PDF
Manual completo
Idiomas: English

Precio: $4.99

Descripción del PANASONIC PT-LB20SU Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English

Recomendar a un amigo

You must purchase it first

Escribir comentario

TEXT_PDF_SNIPPET

PT-LB20NTU / PT-LB20NTE / PT-LB20NTEA / PT-LB20U / PT-LB20E / PT-LB20EA / PT-LB20SU / PT-LB20SE / PT-LB20SEA / PT-LB20VU / PT-LB20VE / PT-LB20VEA

7.4.

Removal of WL-P.C.Board (PTLB20NTU/E/EA only)

1. Remove the upper case according to the section 7.2. "Removal of Upper Case". 2. Unscrew the 4 screws and remove the shield cover and wireless LAN module. Notes: Â· Because the wireless LAN module is connected with the WL-P.C.Board, work carefully when removing it. Â· When installing/detaching the antenna connector, insert or pull out it straight along the center of the connector pin. It causes damage and/or poor contacting of the connector when forcibly installing/detaching it. Â· Connect the connector from the antenna with the original position (connector on the wireless LAN module) after reassembling. 3. Unscrew the 1 screw and remove the WL-P.C.Board.

7.6.

Removal of S2-P.C.Board

1. Remove the S2-P.C.Board block according to the section 7.3. "Removal of A-P.C.Board". 2. Remove the holder while expanding the resin hooks outside. Note: Â· Work carefully not to damage the resin hook.

7.7.

Removal of K-P.C.Board

1. Remove the analysis block, LCD block and lens according to the steps 1 through 3 in the section 7.11. "Removal of Analysis Block and Lens". 2. For PT-LB20NTU/E/EA, unscrew the 4 screws and remove the shield cover and wireless LAN module.

7.5.

Removal of S1-P.C.Board

1. Remove the upper case according to the section 7.2. "Removal of Upper Case". 2. Remove the water-guide plate.

Notes: Â· Because the wireless LAN module is connected with the WL-P.C.Board, work carefully when removing it. Â· When installing/detaching the antenna connector, insert or pull out it straight along the center of the connector pin. It causes damage and/or poor contacting of the connector when forcibly installing/detaching it. Â· Connect the connector from the antenna with the original position (connector on the wireless LAN module) after reassembling. 3. For PT-LB20NTU/E/EA, unscrew the 2 screws and remove the WL-P.C.Board (with metal fittings for securing WL).

3. Unscrew the 2 screws and remove the S1-P.C.Board.

17


	Principal Mapa de la web Contáctenos Su Carrito Compra Segura Su Cuenta Derechos © 2024 Owner-Manuals.com.DOMETIC Service Manuals and User Manuals \| DIORA Service Manuals and User Manuals \| DENON Service Manuals and User Manuals