8.7. Removal of Z-P.C.Board 1. Separate the P-P.C.Board part and Z-P.C.Board part according to steps 1-8 in the section 8.6. "Removal of P-P.C.Board". 2. Unscrew the 2 screws and disconnect the 1 connector, then remove the Z-P.C.Board.
8.8. Removal of V-P.C.Board 1. Remove the upper case according to the section 8.2. "Removal of Upper Case". 2. Remove the A-P.C.Board according to the section 8.4. "Removal of A-P.C.Board". 3. Remove the 1 screw connecting the lower case and main base.
4. Lift the main base and remove the lower case. 5. Unscrew the 6 screws and remove the terminal cover.
