3. Unscrew the 2 screws and remove the K-P.C.Board block.
7. While pressing to shut each hook of the 2 resinous stands, remove the B/Q-Module.
6.6.
Removal of B/Q-Module
1. Remove the upper case according to the section 6.2. "Removal of Upper Case". 2. Unscrew the 2 screws and remove the lamp unit terminal. 3. Unscrew the 2 screws and release the 2 grounding terminals. 4. Unscrew the 3 screws and remove the power block (B/QModule and P-Module).
6.7.
Removal of P-Module
1. Remove the P-Module according to the steps 1 through 5 in the section 6.6. "Removal of B/Q Module". 2. Unscrew the 2 screws. 3. While pressing to shut each hook of the 2 resinous stands, remove the P-Module.
5. Unscrew the 1 screw and separate the B/Q-Module block and P-Module block.
6.8.
Removal of Lamp Unit
1. Turn the projector upside down. 2. Loosen the 2 screws until they idle and remove the lamp unit cover.
