PANASONIC PT-52LCX16
Manual de Servicio

PT-52LCX66 / PT-56LCX66 / PT-61LCX66 / PT-52LCX16 / PT-56LCX16

3. 1) Remove the Top Duct 3 Unit by removing the 4 Screws (421). CAUTION: When removing the Screws (421) on the Top Duct 3 Unit, plastic dust may be produced. Therefore, confirm that there is no dust on the Top Duct 3 Unit. If there is dust, clean the Top Duct 3 Unit with a brush, etc. Otherwise, dust may adhere to the inside of the screen. 2) Remove the Lamp Unit by turning the Knob.

Top Duct 3 Unit
421

Knob
421

Lamp Unit

LVDS Cable
21 Projection Unit
Fig. D2-2

Replacement Note of Projection Unit: 1. After replacing the Projection Unit, be sure to perform "ADJUSTMENT of Projection Unit." Refer to "WHEN INSTALLING THE PROJECTION UNIT OR THE BASE BODY UNIT INTO THE UNIT AT THE USER�S LOCATION:." 2. These parts will be necessary when replacing. Set aside, keep, and re-use. - Top Duct 3 Unit - Lamp Unit

37