SAMSUNG PS-42P4A1X/XEC
Manual de Usuario

Installing the Display on the Wall Attachment Panel

Installation Notes
� Do not install the PDP on any place other than vertical walls. � To protect the performance of the PDP and prevent troubles, avoid the followings: - Do not install next to smoke and fire detectors. - Do not install in an area subjected to vibration or high voltage. - Do not install near or around any heating apparatus. � Use only recommended parts and components.

Mounting Kits (Sold Separately)
Wall Mount Bracket Plastic Hanger Screws

4 EA

4 EA

How to Adjust Mounting Angle
(depending on your model)

1 2
The wall mount bracket is delivered separately. Please tighten the captive screw in the direction of the arrow after assembling the bracket.

Secure the PDP to the wall mount bracket. (Please refer to the following instructions.) Set the angle by pulling the upper end of the PDP attached to bracket in the direction of the arrow. The angle can be adjusted from 0° to 15° by ±2°.

3

English - 10