Change the tempo setting as described below.
� A note does not sound when you press a keyboard key while holding down the CONTROL button. � While holding down the CONTROL button, press keyboard key A 2 (�) to decrease tempo or B 2 (+) to increase it. Holding down either keyboard key changes the setting at high speed. Pressing keyboard key A2 (120) changes the tempo setting to 120. � You can also change the tempo setting(beats per minute) by holding down the CONTROL button and using keyboard keys B2 through A 3 to input values from 0 to 9. You can input a two-digit or three-digit tempo value. Note that the tempo value you input is applied when you release the CONTROL button. The tempo setting does not change if you input a one-digit value or a value that is outside of the allowable setting range. � The tempo can be set within the range of 30 to 255 (beats per minute).
4
When you want to stop the metronome, press the METRONOME button again.
� Pressing the METRONOME button again restarts the metronome sound using the current beat and tempo setting. � If you want to change both the tempo and the beat before restarting the metronome, perform the above procedure here.
NOTE
� You can change metronome beat and tempo settings at any time, even while the metronome is sounding. � You can also use the metronome in combination with memory play. See the section of this User�s Guide covering the function for details.
Adjusting the Metronome Volume
Use the following procedure to increase and decrease the volume of the metronome beat.
To adjust the metronome volume
1
While holding down the CONTROL button, press the keyboard key that corresponds to the metronome volume setting you want to select.
� A note does not sound when you press a keyboard key while holding down the CONTROL button. � You can set a value from 1 to 3.
NOTE
� The metronome volume is automatically set to 2 whenever you turn on piano power.
