Setting the built-in mic gain
You can adjust the input sensitivity of the built-in mic as follows.
Turning the backlight on and off
You can set the display backlight of the PS-04 to on or off as follows. If the PS-04 is powered from batteries, setting the backlight to off will help extend the life of the batteries.
1.
With the recorder stopped, press the [SYSTEM] key.
The system menu appears.
2.
Use the cursor left/right keys to bring up the indication �INT MIC� on the display, and press the [ENTER] key.
1.
With the recorder stopped, press the [SYSTEM] key.
The system menu appears.
The display changes as follows.
Current sensitivity setting
2.
Use the cursor left/right keys to bring up the indication �LCD� on the display, and press the [ENTER] key.
3.
GAIN
L0
The display changes as follows.
Turn the dial to select one of the following settings.
LIGHT
3.
0N
Turn the dial to select either on or off.
� LO This is the on-mic setting, suitable for close-up vocal and acoustic guitar recording (default setting). � HI This is the off-mic setting, suitable for example to record an entire band in a studio.
The default setting is �on� (backlight activated).
4.
To return to the original screen, press the [EXIT] key repeatedly.
Each press of the [EXIT] key goes back by one screen.
4.
To return to the original screen, press the [EXIT] key repeatedly.
Each press of the [EXIT] key goes back by one screen.
HINT
The input sensitivity setting is saved for each project.
