PRO-JECT PRO-JECT12COMFORT
Manual de Usuario

PRO-JECT 1.2 Comfort
Controls, features and connections
1 Motor transportation screw (marked red) 2 Stepped drive pulley 3 Drive belt * 4 Hub 5 Platter with felt mat * 6 Tonearm counterweight * 6a Downforce scale 7 Tonearm lift lever 8/18 Tonearm rest and removable transport lock 9 Tonearm tube 9a Tonearm base 10 Lid * 11 Lid hinges 12 Hinge fasteners 13 Power supply socket 14 Signal output cable 15 Anti-skating weight adjustment scale 16 Anti-skating weight * 17 Anti-skating weight support hoop 20 Power switch 21 Headshell with optional finger lift * 22 Motor 23 Feet 24 Speed change Power supply (not shown) *

Dear music lover, thank you for purchasing a PRO-JECT AUDIO record player. In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully.

!

Warning of a hazard for the user, the unit or possible misuse. Important notice.

The PRO-JECT 1.2 Comfort is supplied with a factory fitted and adjusted cartridge. **The following instructions for adjusting the cartridge are provided in case the cartridge is replaced by a different model at a later date. During assembly and adjustment of the deck small parts could be lost if not carefully placed in a suitable receptacle. Before starting assembly make yourself acquainted with the parts listed above and correspondingly numbered in the technical drawings above. Separately packed items are marked with an asterisk *.

© Pro-Ject Audio · Pro-Ject 1.2 Comfort · Revision 15.4.2004/7.2004

3