|
Usuarios conectados
Actualmente hay 5957 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
5
6
7
8
SPECIAL NOTES � Picture Adjustments
MOVIE or GAME mode may not selected when receiving RGB input. GAME mode setting: � All signals output from the Projection Monitor will be unaffected. Only the original output signal is sent through the output jacks. Picture Quality setting: � When picture quality has been adjusted, the user mode data will be overwritten with the new settings. � The COLOR, TINT, and SHARPNESS settings may not be changed when receiving RGB input (INPUT 3). � When RLS is LEVEL1 or LEVEL 2, CONTRAST, BLACK LEVEL and COLOR cannot be adjusted. Other Picture Quality setting: � The COLOR TEMP, GAMMA and WHITE BALANCE settings may be changed when receiving RGB input and Digital input (INPUT 5, 6). PURECINEMA adjustment: � When the mode has been set to HQ or to STD, the picture may appear unnatural depending on the material being viewed (TV, VCR, DVD, etc.). When this happens, set the mode to OFF.
B A
� Sound Adjustments
BASS, TREBLE and BALANCE are SPEAKER mode settings, which can only be adjusted when mode is NORMAL Surround Mode setting: � This function cannot be used when the SPEAKER mode is CENTER IN or when the SPEAKER mode is OFF and AUDIO OUT mode is FIXED. � The surround effect cannot be obtained with mono sound. � In some cases, the surround effect may be minimal.
C
� Connection with Receiver (1)
Speaker and AUDIO OUT Setting: � After the speaker mode is set to CENTER IN, the volume of the center speaker should be controlled from this monitor. � If AUDIO OUT is set to VAR and the sound is distorted, lower the Monitor volume.
� Connection with Receiver (2)
System Mode ON: � The input cannot be switched even if you press the Input selector button of the remote control unit. � On the sub-picture of a SPLIT screen, only the input signal from the antenna can be displayed. � The SEARCH screen function will not be operable. � No signal will be output from the AUDIO OUTPUT terminal. � Setting SYSTEM MODE ON will cause RGB input signals and DIGITAL input signals to not be displayed.
D
� Changing Screen Mode
� When 1080i, 720p component signals or RGB signals, 1080i DIGITAL signals are input, SCREEN MODE will be limited to FULL.
E
F
PRO-730HD
5 6 7 8
249
|
|
|
> |
|