Inicio >>
INFINITY >>
PRIMUS THEATERPACK Manual de Usuario
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
OPERATION
Surround Modes
When using the system in a Dolby* Digital or DTS® home theater system, make sure all speakers are set to �Small� . Some Dolby Digital-equipped receivers/processors offer different setup options for each source or surround mode; e.g., CD-stereo, videotape, Dolby Pro Logic.* In each case, follow your equipment�s instructions to ensure that the subwoofer output is turned on (if you are using a subwoofer) and that the speakers are set to �Small� in each mode. When using the Primus Theater Pack in a Dolby Pro Logic home theater system, make sure the receiver�s center channel mode is set to �Normal.�
MAINTENANCE AND SERVICE
The satellite and subwoofer enclosures may be cleaned using a soft cloth to remove fingerprints or to wipe off dust. The grilles may be gently vacuumed. Stains may be removed with an aerosol cleaner, following its instructions. Do not use any solvents on the grille. All wiring connections should be inspected and cleaned or remade periodically.The frequency of maintenance depends on the metals involved in the connections, atmospheric conditions, and other factors, but once per year is the minimum. If a problem occurs, make sure that all connections are properly made and clean. If a problem exists in one loudspeaker, reverse the connection wires to the left and right system. If the problem remains in the same speaker, then the fault is with the loudspeaker. If the problem appears in the opposite speaker, the cause is in another component or cable. In the event that your subwoofer ever needs service, contact your local Infinity dealer or Infinity directly at 1.800.553.3332 or www.infinitysystems.com for a service center near you.