LOEWE PLANUS4872
Manual de Usuario

Automatic programming � Setting for �Other satellites�

Setting selection: 1. Mark �Selection� with the yellow buttons w v. 2. Set 1, 2, 3 or 4 with the buttons + or � . Entering oscillator frequency: 1. Mark �LO frequ� with the yellow buttons w v. 2. Enter the oscillator frequency of the LNC with the numeric buttons on the remote control.

The set frequency range (band) must be assigned the LNC oscillator frequency of the connected satellite converter in order for the right reception frequency to be displayed.

Sound settings Some satellite stations broadcast the TV sound on one sound carrier frequency in mono and on another sound carrier frequency in stereo. Stations which broadcast sport usually offer a selection of several languages. In addition radio broadcasts can be transmitted on other sound carrier frequencies (it is best to set these in the �Station search and store� menu, see page 86 onwards). Which sound carrier frequency and which sound mode you need to set depends on the satellite station. Your dealer will give you information. If the stations of the selected satellite transmit with different sound carrier frequencies, manual setting is necessary with the �Station - Search and store� menu after �automatic programming�! Set sound:

w

v Mark �Sound�
Other satellites
Search new Update Storage from O45 Dish

Setting sound 1: 1. Select the �Sound� line with the blue buttons v w . 2. Mark �Sound 1� with the yellow buttons w v. 3. Set the sound carrier frequency with the numeric keys on the remote control (see table on right), e.g. digit 4 = 7.02 MHz sound English. 4. Select �Mode 1� with the yellow buttons

Sound
Norm

PAL

Mode 1 Radio Sound 2 Mode 2

Sound 1

7,O2

Stereo off

7,O2 Stereo

v w

v w

+

�

M

O�9 TV

Entry Menu off

w +

v Select function
or

w v. 5. With the + � buttons, set Stereo, M/280 (large bandwidth), M/180 (small bandwidth) or MJ/17 (sound deemphasis for French stations). Set for example M/280.

�

Set

The different sound carrier frequencies are called with the following buttons: 0 = 5,80 MHz 5 = 7,20 MHz 1 = 6,50 MHz 6 = 7,38 MHz 2 = 6,60 MHz 7 = 7,56 MHz 3 = 6,65 MHz 8 = 7,74 MHz 4 = 7,02 MHz 9 = 7,92 MHz The sound carrier frequencies can also be set with the buttons + � in 10 kHz steps from 5.50 to 9.10 MHz. If the sound is distorted or two different sounds are audible, a wrong sound mode is set. In this case set Mono = M/280 or M/180 instead of stereo. 77

English