There are two sets of upper media-feed rollers located above the maintenance tray. One set of rollers is rubber; the other set is white plastic. Turning the upper rubber rollers also turns the upper plastic rollers. To clean the upper rollers, wet the front and back sides of a cleaning card and place it between the upper black and white rollers at the far left side of the printer. While �rmly holding the cleaning card against the rollers, press the Clean button on the front panel to turn the rollers.
8
9662-77
8. 9.
After the printer turns the rollers several times, move the cleaning card to the right to continue cleaning the upper media-feed rollers. Repeat Steps 8 and 9 until all upper media-feed rollers have been cleaned. If a cleaning card becomes dirty during cleaning, discard it and use another.
10. Press Exit and the printer displays the following message:
Clean:Upper Feed Rollers <---Clean Cancel
