Adjusting the Digitizer
You need to adjust the digitizer when performing a hard reset, the tapping operation or scrolling does not work properly, or when you cannot adjust the brightness of the back light or screen contrast.
1
Tap the arrow in the upper right of the Preference screen and select Digitizer.
The Digitizer calibration screen is displayed.
This Digitizer calibration screen is exactly the same as the screen displayed the first time you turn on your CLI� handheld. Follow the on-screen instructions to adjust the digitizer. Tip
Use the stylus perpendicular to the screen to tap targets.
Customizing your Sony CLI� Handheld (Preferences)
