No hay comentarios de productos.
4-667-097-12 (1)
3 Pull the docking connector upward at the top
Before use
This Compact Keyboard is designed only for use with a CLI� handheld, and has the following features: � Easy input of text and special characters
of the keyboard (1), and slide the PDA foot out of the keyboard (2).
1 Pull the docking connector upward.
Customizing The Keyboard
Setting the Key repeat rate/Delay until repeat
You can change the following settings. Key Repeat Rate: The speed at which a letter, number or other character repeats when you keep a key pressed. Delay Until Repeat: The length of time before a letter, number or other character begins to repeat when you keep a key pressed. Enable Key Clicks: Turning on/off the key clicking sound when you press keys. Enable Keyboard: Enabling the keyboard functions/disabling the keyboard functions while you are not using this unit.
Compact Keyboard
Operating Instructions
� Easy launch of applications by simple key operation � Foldaway, pocket-size keyboard, providing good portability
Docking connector
Location of controls
1
2 Slide out the PDA foot.
PDA foot
1 Turn on your CLI� handheld, and tap the
[Keyboard] icon on the home screen.
The most recent settings screen appears.
2 Tap V in the upper right corner, and select
[General].
The Keyboard General settings screen appears.
PEGA-KB11
Sony Corporation © 2002 Printed in Japan
2
1 PDA foot 2 End grip 3 Application keys
32
Slide the docking mechanism all the way out of the keyboard until the PDF foot flips up as shown.
3 Change the [Key Repeat Rate] and [Delay
Until Repeat] settings by dragging the marker arrows with your stylus.
4 Push down the interface connector of your
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Owner�s Record The model and lot numbers are located on the bottom of your compact keyboard. Record the lot number in the space provided below. Refer to the model and lot numbers when you call your Sony dealer regarding this product. Model No. PEGA-KB11 Lot No. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including any interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: � Reorient or relocate the receiving antenna. � Increase the separation between the equipment and the receiver. � Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. � Consult the dealer or an experienced radio/TV technician for help. If you have a question about this product, call the Sony Customer Information Center at keep on next line 1-877-7607669; or write to the Sony Customer Information Center at 12451 Gateway Boulevard, Fort Myers, FL 33913. The number below is for FCC-related matters only. Declaration of Conformity Trade Name: SONY Model No.: PEGA-KB11 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone No.: 201-930-6972 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme à la norme NMB-003 du Canada.
Installing the software
Before using the Keyboard, install a Keyboard driver from the supplied installation CD-ROM on your CLI� handheld.
CLI� handheld gently into the docking connector of the keyboard to make a connection.
Before installation
Please check the following. � You need a Windows compatible computer on which the Palm Desktop application that is suitable for your CLI� handheld has been installed. Connect the computer to your CLI� handheld, and make sure that a HotSync operation is correctly performed on both your computer and CLI� handheld. � If any other keyboard application has been installed already, disable it, or turn it off. � Make sure that your CLI� handheld has a minimum of 160K free memory. For details on how to check the amount of free memory, see the manual of your CLI� handheld.
Interface connector Docking connector
Key Repeat Rate: Drag the marker arrow toward [Fast] to increase or [Slow] to decrease the repeat rate. Delay Until Repeat: Drag the marker arrow toward [Long] to increase or [Short] to decrease the length of the delay.
4 After changing the settings, tap the
to return to the home screen.
icon
To confirm the settings
You can confirm the Key Repeat Rate and Delay Until Repeat you have set in Step 2 on the General settings screen. After dragging the marker arrows of Key Repeat Rate and Delay Until Repeat in Step 2, input a letter or a number in the space under [Test Repeat Settings] by keeping any key pressed.
Your CLI� handheld automatically turns on. You can now begin typing. Notes
� When you connect the interface connector of your CLI� handheld to the docking connector of the keyboard, make sure that the PDA foot is fully extended. If you make the connection without extending it fully, it may cause a malfunction. � Be sure to put your CLI� handheld on the PDA foot while using the keyboard. If you pull your CLI� handheld toward you with too much force, it may cause an incorrect operation or a malfunction. � Be sure to use the keyboard on a flat surface. If you are typing with the keyboard on an uneven surface, such as your lap, the keyboard may bow slightly in the center, causing an incorrect operation or a malfunction. � Use your stylus for selecting list items, for making menu selections, and for giving commands in applications that are not
1 Insert the supplied installation CD-ROM into
the CD-ROM drive of your Windows compatible computer.
The initial installation screen appears.
Hearing the Key Clicks
You can hear the key clicking sound when you press keys.
2 Click [Install Compact Keyboard Software].
The installer submenu appears.
1 Turn on your CLI� handheld, and tap the
[Keyboard] icon on the home screen.
The most recent settings screen appears.
3 Proceed with the installation, following the
installer�s instructions.
If you have registered more than one user, select a user name from the user list.
2 Tap V in the upper right corner, and select
[General].
The Keyboard General settings screen appears.
4 Click [Done]. 5 Press the HotSync button on the cradle.
A HotSync operation begins and the application is transmitted from your Windows compatible computer to your CLI� handheld.
3 Tap the check box of [Enable Key Clicks] to
tick the item on the General settings screen.
You hear the clicking sound when you press keys.
compatible with the keyboard. � The Caps Lock key on the Compact Keyboard does not interlock with the Caps Lock of the onscreen keyboard of the CLI� handheld. Caps Lock must be set individually on either keyboard.
Getting started / Using the Keyboard
1 Push the latch down to unlock the keyboard.
After use
1 Disconnect your CLI� handheld from the docking
connector.
2 Retract the PDA foot into the keyboard and push the
docking connector downward.
4 After setting the key clicks, tap the
Slide the PDA foot firmly into the keyboard.
icon to
return to the home screen.
Turning off the key clicks
Latch
Tap the check box of [Enable Key Clicks] to remove the tick on the General settings screen.
Push the docking connector downward.
Disabling The Keyboard Functions
You can suspend the keyboard functions when you do not use this keyboard temporarily.
v
3 Slide the end grips toward the ends of the case.
1 Turn on your CLI� handheld, and tap the
[Keyboard] icon on the home screen.
The most recent settings screen appears.
2 Tap V in the upper right corner, and select
[General].
The Keyboard General settings screen appears.
3 Tap the check box of [Enable Keyboard] to
remove the tick on the General settings screen.
End grip End grip
� CLI� and Jog Dial are trademarks of Sony Corporation. � All other trademarks are trademarks of their respective owners. ©2002 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited.
You can now fold up the keyboard. Unfold the keyboard and set it on a firm, flat surface.
The keyboard functions are suspended, and you cannot use the keyboard even if you connect it to your CLI� handheld.
4 Fold the keyboard as shown.
Press the four corners of the case together until they click into place to close the keyboard.
2 Slide the end grips inward, bringing the
keyboard sections together.
4 After setting, tap the
home screen.
End grip
icon to return to the
v
End grip
Note For the latest support information, check our official Sony CLI� Web site
When you disconnect your CLI� handheld, make sure to pull it straight upward. If you pull your CLI� handheld toward you with too much force, the PDA foot may be broken and cause a malfunction.
Using the keyboard again
Tap the check box of [Enable Keyboard] to tick the item on the General settings screen.
http://www.ita.sel.sony.com/ support/clie/access/
The Keyboard is set.
Printed on 100% recycled paper using VOC (Volatile Organic Compound)free vegetable oil based ink.
Attaching the Keyboard to your CLI� handheld
Before attaching the keyboard to your CLI� handheld, make sure to tap the check box of [Enable Keyboard] to tick the item on the General settings screen. Attaching the keyboard without the tick on the item, CLI� handheld may start a HotSync operation. This is not a malfunction.
