PIONEER PDK-50HW3/UCYVBKE
Manual de Servicio

1

2

3

4

3.2 OVERALL WIRING DIAGRAM
A

K SENSOR-K ASSY
(BZW1519)

J

SENSOR-J ASSY (BZW1518)

G LED-G ASSY (BZW1515)
B

By changing jumper-pin settings on the SENSOR-I, -J, and -K Assy's, you can use the SENSOR-I, -J, and -K Assy's one in place of another. Refer to "7.1.4 OPERATION CHECKS USING EXCHANGEABLE ASSY'S"

CN1

CN4

÷ When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST". ÷ The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. ÷ : The power supply is shown with the marked box.
C

CN1 CN4

<BACK SIDE VIEW>
CN1

CN4
D

E

CN3

(BZW1513) (BZW1514)

LED-E LED-F ASSY

E F

CN2

F

CN6 CN5

D LED-D ASSY (BZW1512)

CN4 CN1

C LED-C ASSY (BZW1511)

By changing jumper-pin settings on the LED-B, and -C Assy's, you can use the LED-B Assy as the LED-C Assy, and vice versa. Refer to "7.1.4 OPERATION CHECKS USING EXCHANGEABLE ASSY'S"

16
1 2

PDK-50HW3
3 4

CN1 CN4