PIONEER PDA-5004/TA
Manual de Usuario

System Settings
Setting the onscreen display language
The onscreen display language has been set to Chinese as the factory default. To change to English, the screen setting must be changed. Follow the procedures below to change the setting.

4

Use the 2/3 buttons to select [OPTION].
��
�� ��设�
LANGUAGE ��设� ��管�模� ����伤 ���� ��设�模� ���� ����

���
�项

English System Settings

设�

: 中� : �� :� :� :� : �� :� : ��

SET

确认

MENU

��

MENU 5/� 2/3 SET

STANDBY/ ON

5

Use the 5/� buttons to select [LANGUAGE], then press the SET button.

MENU 2/3 SET 5/�

LANGUAGE
SET

:
MENU

中�
��

设�

Display operating panel

Remote control unit

1 2 3

Set the rear panel MAIN POWER switch to ON. The STANDBY indicator on the front panel will light red. Press the STANDBY/ON button to turn the power ON. The ON indicator on the front panel will light green. Press the MENU button to display the menu screen.
��
��
对�度 �亮度 �彩 �� �度 ���认���

6

Use the 2/3 buttons to select [ENGLISH]. Each time the 2/3 buttons are pressed, the language alternates between those available, in the following order:
3 ENGLISH 2

���
��设�
: : : : : 0 0 0 0 0 L A N G UAG E
SET

设�

�项

:

ENGLISH
MENU

设�

��

SET

确认

MENU

��

7

With the desired language displayed, press the SET button. The selected language will be set in memory, and the screen will return to that shown in step 4. When settings are completed, press the MENU button to return to the normal screen image.

8

Note
When the onscreen display language is set to any of INPUT 1 to INPUT 5, the same display language will be set, regardless of the type of input.

18
En