No hay comentarios de productos.
PD-35DX
1.2 INSTALLATION 1.2.1 HEAT DISSIPATION If the heat dissipation vent behind this unit is blocked, cooling efficiency may deteriorate and temperature inside the unit will rise. The temperature sensor that protects the unit will be activated when internal temperature exceeds the pre-determined level and power will be turned off automatically. Therefore, please make sure pay attention not to block the heat dissipation vent as well as the ventilation outlet behind the unit and ensure that there is room for ventilation around it. 1.2.2 INSTALLATION REQUIREMENTS Ensure that the minimal distance is maintained, as specified below, between the unit with and the surrounding walls, as well as the floor etc. Install the unit on stable flooring or stands. Take precautionary measures to prevent the unit from tipping in order to protect against accidents and earthquakes.
SPACE REQUIRED FOR INSTALLATION OF THE DISPLAY UNIT
150mm or more
200mm or more
150mm or more
200mm or more
50mm or more
SPACE REQUIRED FOR INSTALLATION OF THE RECEIVER UNIT
100mm or more 100mm or more 100mm or more 100mm or more 100mm or more
1.2.3 FALL TIP PREVENTION MEASURES Take precautionary measures to prevent the unit from falling or tipping to protect against emergencies such as earthquakes as well as accidents. Fasten the supplied hook for tip fall prevention using the screws, also supplied, behind the display unit, and use them together with durable cords (to be purchased separately) to secure the unit to a robust part such as the wall surface or pillars.
TV/VIDE MENU OK P
The supplied hook for tipfall prevention
1-4 (No.52089)
|