SET UP menu 4 Press the green or red button to search for a TV channel Scanning stops when the TV finds a TV channel. Then the TV channel is displayed. 5 Press the green or red button repeatedly until the TV channel you want appears If the TV channel reception is poor: Press the blue or yellow button to finetune the TV channel. 6 Press the a button and register the TV channel to a Programme number (PR) The normal EDIT menu is resumed.
DECODER (EXT-2)
If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels. 1 Turn on the decoder power 2 Display the scrambled TV channel on the TV Even if the decoder is working, a scrambled picture appears. 3 Display the SET UP menu and choose DECODER (EXT-2)
SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE DECODER(EXT-2) EXT SETTING PICTURE SHIFT
LANGUAGE
The LANGUAGE setting which was performed in the �Initial settings� (page 9) can be changed. 1 Choose LANGUAGE, then press the a or 3 button A sub-menu of the LANGUAGE function appears.
> LANGUAGE
ON OFF
OK
D0029-EN
4 Press the 5 buttons to choose ON An unscrambled picture appears. To cancel the DECODER (EXT-2) function: Press the 5 buttons to choose OFF.
OK
D0002-EN
5 Press the a button to complete the setting The T-V LINK menu appears.
T-V LINK DOWNLOAD TV VCR
2 Press the 5 and 6 buttons to choose a language. Then press the a button
OK
EXIT
D0005-EN
You can send the programme numbers data to a VCR with the T-V LINK function.
