ROLAND PCR-30
Guía de consulta rápida

PCR-30/50
MIDI Keyboard Controller Panic Mode
Use the Panic feature if MIDI notes become stuck or if other problems occur with the sound. 1. Simultaneously press PROGRAM CHANGE and EDIT so they�re both lit. 2. Press ENTER�the PROGRAM CHANGE and EDIT buttons blink several times and the following messages are transmitted on all MIDI channels: All Sound Off, All Notes Off, and Reset All Controllers.

e

TurboStart

Assigning Controllers
There are 25 knobs, buttons and sliders on the PCR-30 and PCR-50 that can be assigned to almost any MIDI message. Check out Pages 108-129 of the Owner�s Manual for specifics on the different messages you can send and how to program them. As an example, let�s assign the S1 slider to transmit MIDI Volume messages on MIDI Channel 3: 1. Press EDIT so it�s lit. 2. Move the S1 slider to select it for editing�the screen displays �S-1��and then press ENTER. 3. Press the key with �CONTROL CHANGE� printed directly above it, and then press ENTER. 4. Use the DEC and INC buttons or the numbered keys to select 3, for MIDI Channel 3. 5. Press ENTER. 6. Use the DEC and INC buttons or the keyboard to select 7, the controller number for MIDI Volume messages. 7. Press ENTER. Some commonly used MIDI controllers are: � 1�Modulation � 5�Portamento (glide) Time � 7�Volume � 10�Pan � 11�Expression � 91�Reverb Depth

TBS196

©2003 Roland Corporation U.S.

www.RolandUS.com

Faxback #20229

Page 2