Use a clearance gauge or the like to remove hinge caps.
Remove the two cables that connect the display unit to the board. Remove the four screws (2 at each side) securing the display unit . Remove the display unit.
14
Raise the tip of the connector to unlock.
13
13
Remove the glide pad button (2 screws) Remove the screw securing the HDD. Remove the HDD.
12
12
17 18
19
Remove the glide pad that is secured to the button section with double-coated tape.
15
17
Remove the three screws securing the cooling body.
17
Remove both the cooling body and mother board from the lower cabinet. Remove both the fan and cooling body from the mother board.
