PHILIPS PC0127P
Manual de Usuario

3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL

HOW TO USE THE ON-SCREEN MENU (CONTINUED)
WELCOME MESSAGE* (>) SETUP x CONSUMER FEATURES MENU_ Applicable / available only to the Commercial Mode / setup menu. The Welcome Message feature makes it possible for an on-screen message to appear whenever the television is first turned on. The message will remain until any front-panel keyboard command or remote control command is received. The Welcome Message sub-menu is shown below. WELCOME MESSAGE MESSAGE LINE 1 LINE 2 CLEAR EXIT

OFF / ON (20 characters) (20 characters)

> >

Use cursor-up and cursor-down to select the Welcome Message sub-menu item. While Line 1 or Line 2 of the Welcome Message message is highlighted, use cursor-left and cursor-right to enter message-edit mode and position the cursor within the line of the message content. Use cursor-up and cursor-down to change the character at the current position. Press RECALL on the Setup Remote to exit the editing mode and resume Welcome Message sub-menu item selection. > NOTE: WELCOME MESSAGE, when ON, overrides CHANNEL GUIDE at power-on, if the latter has been enabled.

CHANNEL GUIDE* (OFF / ON / POWER ON) SETUP x CONSUMER FEATURES MENU_ Applicable / available only to the Commercial Mode / setup menu. CHANNEL GUIDE provides an on-screen list of all channels / inputs currently saved in the channel ring (see CHANNEL INSTALL) and their corresponding labels (see CHANNEL INSTALL), for any channels / inputs for which labels have been assigned. When CHANNEL GUIDE is ON, the channel guide appears when a remote control CH GDE command is received. When CHANNEL GUIDE is set to POWER ON, the channel guide appears when the television is first powered on, as well as when a remote control CH GDE command is received. When CHANNEL GUIDE is OFF, the channel guide never appears. REMINDER* (OFF / ON) SETUP x CONSUMER FEATURES MENU_ The REMINDER feature, when ON, causes the television to constantly display the currently-tuned channel / input and/or its label (if one has been assigned, see CHANNEL INSTALLATION) in the upper-left-hand corner of the screen. When REMINDER is OFF, the channel number / label will only appear briefly immediately after channel / input is selected. NOTE: The REMINDER feature is available in the television�s commercial-mode TV SETUP and CONSUMER menus.

3-DIGIT ENTRY* (OFF / ON) SETUP x CONSUMER FEATURES MENU_ Applicable / available only to the Commercial Mode / setup menu. Determines whether two or three remote-control digit commands initiate a channel-tune command. When OFF, tuning will occur upon the reception of two remote-control digit commands. When ON, tuning will occur upon the reception of three remote-control digit commands.

* COMMERCIAL FEATURE

10