5. Open the Cassette Cover fully. 6. Remove the tape slack by rotating the Takeup Reel Gear of the cassette tape.
Fig. 5-3
7. Take out the cassette tape. 8. Connect the Power or Battery to set the Mechanism to STOP Position.
6.1.10. HOW TO USE TP BOARD
6.1.10.1. TP Board is required when:
1. performing "TAPE INTERCHANGEABILITY ADJUSTMENT." 2. performing "PC-EVR Adjustment." 3. the cassette tape is jammed. Refer to "HOW TO REMOVE A JAMMED TAPE." 4. loading or unloading the Mechanism (Electrical Method). 5. performing a signal check.
6.1.10.2. How to assemble TP Board:
